POWER FLUSHING KIT

Similar to the CF30 Classic (and with the same capabilities) but has quick release hose fittings, pressure gauge, three port valves and the ability to dump with flow in either direction. Complete with all hoses and adapters, a starter pack of chemicals and FREE training.

The CLEARFLOW CF30 HYPER-JET pump is designed to allow power flushing of a heating system with minimal dismantling. Generally, it is only necessary to remove either the system circulator pump, or alternatively one radiator for attachment of the CF30 to the heating system, although there are other possible attachment methods - see detailed instructions.

Radiators may be individually flushed without removing or disconnecting them from the system.

The unit may be used with any commercially available chemicals currently in use for flushing and descaling heating systems, including strong acids or alkalis.

Pumps with 220 volt motors are single phase, and may be used on a standard domestic 13 amp supply. A 5 ampere fuse should be fitted in the plug top. We recommend the use of a residual current circuit breaker plug or adapter for extra protection.

 

The CF30 Hyper-Jet comes with the same starter kit as the
CF30 Classic (as shown below)